The solution for bathroom waterproofing membrane mainly includes the following steps and precautions:
Preparation work:
Cleaning work: Clean up the clutter in the bathroom to ensure sufficient space in the construction area.
Inspect the base layer: Check the condition of the bathroom base layer to ensure it is flat and sturdy, and repair all cracks and damages.
Base treatment: For walls, a layer of waterproof primer can be applied first to enhance the waterproof effect of the base layer.
Construction steps:
Sealed doors and windows: Before construction, it is necessary to seal the doors and windows of the bathroom to prevent moisture and dust from entering the room during the construction process.
Brushing waterproof adhesive: Apply waterproof adhesive evenly to key areas such as corners, thresholds, and corners of the bathroom to ensure good sealing effect.
Laying rolls: Lay rolls on walls and floors, paying attention to the overlapping parts of the rolls that need to be compacted to ensure that there are no gaps between the rolls.
Fixed coil: Use specialized sealant or glue to fix the coil on the wall and floor. The fixing position should be firm and reliable, and ensure the adhesion of the coil is firm.
Sealing treatment: After the coil is fixed, it needs to be sealed. Waterproof adhesive can be used to seal the joints of the roll material to prevent water vapor from penetrating.
Clearing the sewage pipeline: After the construction is completed, the bathroom sewage pipeline should be cleaned to ensure smooth drainage.
Construction precautions:
Construction environment: During construction, it is required that the humidity in the bathroom should not be too high, as high humidity can affect the waterproof effect.
Environmental protection: Before construction, it is necessary to ensure that the foundation of the building has been laid and basic drying needs are met. It is best to conduct a moisture content test. Generally, the water content of the environment in which toilet waterproofing membranes are used should not exceed 8%.
End treatment: In the final stage, remember to apply a portion of cold primer on the end, and then use adhesive to stick the decorative materials on the surface. You can use paint or directly apply tiles, depending on the design needs of the building.
By following the above steps and precautions, the construction of bathroom waterproofing membranes can be effectively implemented to ensure the waterproofing effect of the bathroom.








